Solar charge controller with Bluetooth and maximum power point tracking (MPPT) for up to 100 V module voltage and max. 30 A charge current. This SmartSolar charge controller maximizes the energy harvest from your solar panel and ensures that your battery is fully charged in as short a time as possible.
Bluetooth Smart integrated: no dongle required
The wireless solution to set up, monitor and update the controller with Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a color control panel, PC or other device.
Ultra-fast Maximum Power Point Tracking (MPPT).
Especially on cloudy days, when light intensity is constantly changing, an ultra-fast MPPT controller can increase energy output
energy output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in Partial Shading Mode
In partial shading, two or more maximum power points may be present on the power-voltage curve.
Conventional MPPTs tend to lock onto a local MPP that may not be the optimal MPP.
The innovative BlueSolar algorithm maximizes energy output by always settling on the optimal MPP.
Excellent conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Full output current is possible up to 40°C (104°F).
Flexible charging algorithm
Fully programmable charging algorithm (see software page on our website) and eight pre-programmed algorithms, selectable
selectable with a rotary switch (see manual for details).
Comprehensive electronic protection
Over-temperature protection and power reduction at high temperatures.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Real-time data display options
- Apple and Android smartphones, tablets and other devices.
| Herstellerinformationen |
| Hersteller: |
Victron Energy |
| Modell-Reihe: |
SmartSolar |
| Modell-Nr.: |
MCA2425 |
| EAN: |
8719076040170 |
| Produkteigenschaften |
| Hersteller: |
Victron Energy |
| Stromanschlüsse: |
16 mm² / AWG6 |
| Masse (L x B x H): |
186 x 70 x 130 mm |
| Batteriespannung: |
12 V / 24 V - automatische Wahl |
| Nennladestrom: |
30 A |
| Eigenverbrauch: |
12V: 30mA, 24V: 20mA |
| Schutzklasse: |
IP22 (Anschlussbereich), IP43 (Elktronische Bauteile) |
| Feuchte: |
95 % nicht kondensierend |
| Schutz: |
Verpolung an Batterie (Sicherheit) / Ausganskurzschluss / Übertemperatur |
| Konstant-Ladespannung (absorption): |
14,4 V / 28,8 V (regulierbar) |
| Erhaltungs - Ladespannung (float): |
13,8 V / 27,6 V (regulierbar) |
| Betriebstemperatur: |
-30°C bis +60°C (voller Nennausgang bis zu 40°C) |
| Solarmodul-Leistung max. [Wp]: |
440/880Wp |
| Wirkungsgrad: |
98% |
| Artikelgewicht: |
1,30 Kg |
